ZIMELE MANUFACTURING PLC


Mobile +251 960 437 575
Mobile 2 +251 960 436 868
Mobile 3 +251 912 488 337
LocationBole biselex building 2nd floor, Addis Ababa, Ethiopia
Primary CategoryGypsum Blocks
ZIMELE MANUFACTURING PLC

ZIMELE MANUFACTURING PLC is the importer for Knauf products in Ethiopia, including gypsum board, magnesium profile U-Channel, C-Channel, L-Angle, Omega, and various types of Knauf screws

Knauf Regular Gypsum Boards (RG) are gypsum wallboards which are essential for standard lightweight drywall constructions.

Knauf Regular Gypsum Boards are the essential for standard lightweight drywall construction and are used as the cladding component for:

Fields of Application

    • Drywall partitions using metal frames
    • Suspended ceilings using metal frames
    • Furring and wall linings
    • Prefabricated building units
    • Dry-lining block-work concrete walls using dot and dab of a gypsum based bonding compound

Properties

    • Lightweight constructions
    • Easy, fast and dry application
    • Good sound insulation performance
    • A material that breathes and balances room climate and humidity levels
    • Environmental friendly
    • Limitless design options

Board Dimensions

    • Thickness : 9.5 mm / 12.5 mm / 15 mm
    • Width : 1200 mm
    • Length : 2400 or 3000 mm*
      • Special sizes & thickness are available upon request & conforming to EN 520

Edit 5

Appearance

  • Ivory / Grey Paper Liner
  • Board Type: EN520 - Type A
  • Reaction to Fire: A2-s1,d0 (B) According to DIN EN 13501- 1

Edit 2

Why Knauf plasterboards?

    • Knauf boards are German quality standard boards that are being produced locally. They adhere to both international & local standards.
    • Strong & durable. High resistance to impact. Note: thicker boards (=/>12mm) are stronger with less damage at the edges.
    • Knauf boards are lightweight, easy to carry and not easily damaged during transportation.
    • Knauf boards offer a better quality finish due to it’s flexibility, this helps to achieve any required design details.
    • Easy workability: Knauf boards give you a sharp cut with little rasping required.
    • Knauf offers technical, commercial & site support
    • Wide range of high performance boards that are great for acoustics & sound insulation, as well as moisture, water & fire resistant.
    • Training on products use & applications as well as knowledge sharing with customers.

Why Knauf Finishing Solutions?

    • Knauf Bora products are easy to apply, you will achieve high-quality results easier and faster.
    • Easy to achieve the recommended or optimal thickness of the material applied to achieve the best result.
    • Easier to sand, requires less effort to achieve a smooth final surface.
    • The ability of the finish to withstand cracking at a given thickness. A better resistance to cracking means a stronger finish that will not crack easily.
    • Gives a smooth & even surface, free of bumps, dents and any spots.
    • Knauf JointBora has very low shrinkage. This saves time & material for the end user since theres no need to repeatedly level the joint.
    • Knauf FinishBora allows you the time to manipulate the product to achieve the desired finish on the wall.
    • By using Knauf Finishing Solutions you will save up to 40% compared with solutions that will require you to mix with paint and you will have less waste.

Why Knauf Profiles & Accessories?

    • Metal profile systems are lighter compared to timber brandering.
    • Metal Profiles are easier to cut/snip & join. Without the use of power tools timber is harder to cut & join.
    • Knauf Metal profile systems are >40% quicker to install than timber systems.
    • Metal profiles are easier to create design elements for decoration.
    • Timber is susceptible to warping due its high moisture content. This damages joints on the plasterboard & leads to failure to get a plumb level ceiling.
    • Metal Profiles System are as structurally sound as timber based system & Installations.
    • Metal profile provide better fire protection, they are insect resistant & do not decay.
    • Knauf Metal profile systems are certified and guarantee a high quality finish and performance.
    • Knauf profiles are made from hot dipped zinc galvanized steel profiles of Z100 for indoor use. The zinc coating protects the steel profiles form red rust.
    • It is important to use structurally sound profiles. This increases fire & acoustic performances of your ceilings & partitions.

Contact us
Add:- Bole biselex building 2nd floor
Tel:- +251 960 437 575 / +251 960 436 868 / +251 912 488 337


Shared Banner Directory p8