| Mobile | +251 911 22 46 76 |
| Mobile 2 | +251 910 31 69 05 |
| Location | Shop # 1- AB Zone Bldg 1st Floor, Office #111; Shop #2 - Haile G/Silassei Avenue, Around St. Urael Church, Addis Ababa, Ethiopia |
| Primary Category | Building and Finishing Materials |
Elkanah Trading PLC (ETP) was established in 2014 with the objective of doing the import, wholesale, retail sale of construction finishing materials and construction machinery in Ethiopia. It supplies all your needs of material to build your residences, buildings, hotels and others.
MODIFIED BITUMINOUS ATERPROOFING MENMBRANES.
DWI (KSA)
MODERN(EGYPT)
ACRELIC ELASTOMERIC EMULSION
NONWOVEN GEOTEXTILE
ALYAF(KSA)
CEMENTITIOUS WATERPROOFING
AIM(UAE)
COLMEF(UAE)
BITUMEN EMULSION
AMI(UAE)
COLMEF(UAE)
LATEX MODIFIED BITUMEN EMULTION
AMI(UAE)
COLMEF(UAE)
SEMI-FLEXIBLE PROTECTION AND RECOVERY BOARD
DWI(KSA)
JOINT SEALANT
COLMEF(UAE)
CRISTALAIN CEMENTITIOUS WATERPROOFING
COLMEF(UAE)
SBR LATEX
COLMEF(UAE)
An APP type modified bituminous membrane
GENERAL DESCRIPTION
ASPHALTOPLAST is the standard roofing and waterproofing membrane, reinforced either with a core of non-woven polyester of 180g/m2 nominal weight (referred to as P) or a 50g/m2 fiberglass fleece (referred to as F). It is the recommended roofing membrane but can be useful for another variety of applications among them; large slabs, terraces, bathrooms, wet areas, foundations, basements, tanking and others.
Variants of the membrane come with other polyester reinforcement of 200g/m² to 250g/m2.
An APP type modified bituminous membrane
PLASTOMEX is a general-purpose roofing and waterproofing membrane, reinforced either with a core of non woven polyester of 140g/m2 nominal weight (referred to as P) or a 50g/m² fiberglass fleece (referred to as F). It is suitable for a variety of applications among them; roofs, terraces, bathrooms, wet areas, foundations, basements, tanking and others.
APP MODIFIED BITUMEN PLASTOMERIC WATERPROOFING MEMBRANE
Plastomeric waterproofing membrane modified with top quality APP polymers and reinforced with non-woven polyester.
APP MODIFIED BITUMEN PLASTOMERIC WATERPROOFING MEMBRANE
REINFORCED WITH SPUN-BOND NON WOVEN POLYESTER
What is BITUSHAPE ?
BITUSHAPE -P is a general-purpose membrane, can be applied virtually anywhere where torch-applied modified bitumen membranes subject to light to moderate mechanical stresses are specified, and normal low-temperature performance is required.
Product Range
Upper surface finish choices include:
BITUSHAPE -P can be applied in:
BITUSHAPE -P with Mineral Slated Finish is recommended for exposed roofing system (Unprotected) for Non-accessible roofs or roofs subject to low traffic conditions.
CRYL is an acrylic water-based waterproofing emulsion that cures into a tough elastic film able to withstand severe expansion and contraction movements. A non-toxic, Environmentally friendly coating that combines both waterproofing and reflective abilities.
ALYAF A201 is a nonwoven geotextile made from staple fibers, mechanically bonded by a needle punching process to produce a dimensionally stable network. The fibers used are 100% whiten polyester, ultra-violet resistant with 256°C melting point. ALYAF geotextiles are manufactured according to Quality System procedures that have been assessed and certified in accordance to EN ISO 9001:2008.
APPLICATION AREAS:
Two component flexible cement for mortar for waterproofing
AQUABRUSH is a complete easy to use cementitious waterproofing system. It consists of two-component packages, factory blended under strict quality control for optimum results in the field. A is specifically designed to waterproof and protect concrete and masonry surfaces. It is ideal for above and below ground structures, interior and exterior AQ is used extensively in below-grade areas subjected to water pressures in tanks, underground, utility structures, concrete and masonry foundations, elevator pits, cisterns, and all types of liquid containing facilities.
Two-Component Elastomeric Cementitious Waterproofing Coating
MANTOBRUSH is a two-component, cementitious acrylic modified waterproofing coating. It is composed of special types of types of cement, silica sand, reactive fillers (powder), and acrylic polymer blended with chemical additives (liquid). Once mixed, it produces a workable, easy to apply product that can be applied with a brush or spatula.
MANTOBRUSH provides a seamless, hard wearing, flexible waterproofing membrane with excellent
adhesion to the surface.
Brush applicable bitumen emulsion. Thick liquid formed of water emulsified bitumen blend suitable to be used as a protective coating for concrete, masonry and as primer for Bituminous membranes.
YIELD
The recommended rate of application is 2.5m per liter depending on site condition.
HEALTH & SAFETY
As with all Bitumen products caution should always be exercised.
Protective clothing such as gloves and goggles should be worn. Treat any splashes to the skin or eyes immediately with fresh water. Should any of the products be accidentally swallowed, do not induce vomiting call for medical assistance immediately. Ensure that the container is available for medical attendants to examine any relevant instructions and content details.
CLEANING
The surface shall be cleaned thoroughly of all contaminants like dust, traces of curing compound, oil
and grease. All surface imperfections. protrusions, structurally unsound and friable concrete must be
removed.
Cold Applied Bitumen Emulsion
This preparation shall be such as to leave a sound exposed concrete surface free from dust, loose
particles and any deleterious matter. If the concrete
ASFABIT is a cold applied water based bitumen with special additives. It is a blend of selected bitumen
emulsified with water to give an easily applied protective coating. Once cured, ASFABIT forms a seamless film with great adhesion to the substrate.
For waterproofing underground structures, the bituminous emulsion shall be applied by brush or squeegee at a maximum rate of 200 microns per coat. The two coats must be applied at right angles to one another with a minimum of 6-hour intervals between each application at 25°C. Each coat must be completely dry before the next coat is applied.
DESCRIPTION
Anionic latex modified bitumen emulsion; Latex Rubber content of dry film 15% minimum. It is dark brown in color, the product also contains a quantity of bio-acid to inhibit the growth of bacteria and mould both in the product itself and subsequent to application. These properties impart excellent durability and waterproofing characteristics
Used for waterproofing in wet areas (bathrooms and kitchens) and as a damp proofing membrane in sandwich construction as a general-purpose waterproofer for walls, floors, other structures, and as a vapor seal as well. It's also an effective adhesive and bonding agent for insulation boards, cork panels
etc. It's practically suitable where some movements of structure are expected, exhibits much better permeability and elasticity characteristics than similar material without latex.
The surface to be treated should be cleaned, remove dust. grease etc., should be applied by brush, roller or by spraying equipment for large surfaces on concrete or other absorbent surfaces first apply a coat of AQUATEX 2000.
Flexible, Rubberized Bitumen Emulsion
ASFABIT RB is a cold applied rubberized bitumen emulsion in dark brown color that, when dries, it
forms tough black seamless and flexible coating.
This preparation shall be such as to leave a sound exposed concrete surface free from dust, loose particles and any deleterious matter. If the concrete surface is defective or has laitance, it must be cut back to a sound base.
Single Component Polyurethane Joint Sealant
ELASTOSEAL PU25 is a high-performance, single component moisture-curing polyurethane, elastomeric joint sealant. When cured it forms a flexible, weatherproof joint sealant with superior adhesion to most substrates.
ELASTOSEAL PU25 can be used in a wide range of applications in the construction industry including:
Crystalline Waterproofing Mortar
KRETESIL CR provides total and permanent waterproofing solution to water leakage, ingress or seepage in concrete structures or any cementitious substrates due its unique, surface-applied penetrative capillary waterproofing system.
KRETESIL CR is generally applied to concrete and other cement structures where water needs to be kept in or kept out such as:
Elastomeric Cementitious Waterproofing Mortar
KRETESIL NT is a two component acrylic modified cementitious waterproofing mortar composed of high quality cement, silica sand, special hydrophobic agents in powder form (component A) and specially formulated copolymer acrylic agent in liquid form (component B). It can be applied on concrete, bricks, cement plasters, etc.
KRETESIL NT is primarily used for waterproofing surface treatments of concrete or masonry water tanks designed to contain drinking water. It is nontoxic and easy to apply, with excellent bonding to concrete and masonry.
Static cracks that are greater than 0.3mm shall be repaired by chiseling the crack into a V-shape, to a depth and width of 25mm and priming it with Primer A18 followed by the application of COLMEF's cementitious repair material.
KRETESIL NT can also be used for the following:
SBR Bonding Agent for Cement Mortar & Concrete
SBR LATEX RIPRESA is a styrene butadiene polymer latex with high bonding characteristics. It is stable under wet alkaline conditions forming a reinforcing polymer matrix within cementitious mixes including concrete, screed and mortar. It is mixed with cement mixture to give higher adhesion power to all surfaces, extra bonding strength, excellent plasticity, higher impermeability and flexure resistance, higher abrasion and acid resistance and can be considered as a waterproof admixture when mixed with cement.
SBR LATEX RIPRESA is used to:
Mortars mixed with SBR LATEX RIPRESA can be used for horizontal, vertical, and overhead repair works
Rapid Setting Water Plug Mortar
MUREX is a rapid setting water plug mortar composed of special blend of hydraulic cements, fillers, graded fillers and chemical additives. MUREX is a dry powder that when mixed with water, quickly sets and expands as it cures to provide a permanent watertight seal thereby stops rapidly active water
leaks and seepage holes and cracks in concrete and masonry
MUREX is an effective water plugging product that can be used for sealing cracks and construction
joints in the following:
ELASTOJOINT PVC is primarily composed of high grade quality Poly-Vinyl Chloride compound that is plasticized and stabilized in order to offer an extra long life performance in concrete structures against water leakages. It is specially designed to 
serve as an integral sealing system for construction, contract
and expansion joints in areas where water retention and water exclusion is required.
ELASTOJOINT PVC provides an effective and thorough means of waterproofing for the following:
ELASTOJOINT PVC serves also powerful support to keep water out of concrete structures such as:
