ELKANAH TRADING PLC (ETP)


Mobile +251 911 22 46 76
Mobile 2 +251 910 31 69 05
LocationShop # 1- AB Zone Bldg 1st Floor, Office #111; Shop #2 - Haile G/Silassei Avenue, Around St. Urael Church, Addis Ababa, Ethiopia
Primary CategoryBuilding and Finishing Materials
ELKANAH TRADING PLC (ETP)

Elkanah Trading PLC (ETP) was established in 2014 with the objective of doing the import, wholesale, retail sale of construction finishing materials and construction machinery in Ethiopia. It supplies all your needs of material to build your residences, buildings, hotels and others.

Construction Materials

  • Waterproofing
  • Roofing materials
  • Heating

Finishing Materials

  • Granite
  • Ceramics
  • Porcelain
  • Furniture
  • Kitchen accessories

Products We Supply

MODIFIED BITUMINOUS ATERPROOFING MENMBRANES.

DWI (KSA)

  • ASPHALTOPLST
  • PLASTOMIX

MODERN(EGYPT)

  • ROFLEXP
  • BITUSHAPE-P

ACRELIC ELASTOMERIC EMULSION

  • DWI(KSA)
  • DERMACRYL

NONWOVEN GEOTEXTILE

ALYAF(KSA)

  • ALYAF 201
  • ALYAF 251
  • ALYAF 301

CEMENTITIOUS WATERPROOFING

AIM(UAE)

  • AQUA BRUSH

COLMEF(UAE)

  • MONNELI MANTOBRUSH

BITUMEN EMULSION

AMI(UAE)

  •  AQUA PRIME

COLMEF(UAE)

  • MONNELI ASFABIT

LATEX MODIFIED BITUMEN EMULTION

AMI(UAE)

  • AQUATEX2000

COLMEF(UAE)

  • MONNELI ASFABIT RB

SEMI-FLEXIBLE PROTECTION AND RECOVERY BOARD

DWI(KSA)

  • ARMORROOF 4MM
  • ARMOPROOF 5MM

JOINT SEALANT

COLMEF(UAE)

  • MONNELI ELASTOSEAL PU25

CRISTALAIN CEMENTITIOUS WATERPROOFING

COLMEF(UAE)

  • MONNELI KRETESIL CR
  • MONNELI KRETESIL NT

SBR LATEX

COLMEF(UAE)

  • MONNELI SBR LATEX RIPRESA

 

ASPHALTOPLAST

An APP type modified bituminous membrane

GENERAL DESCRIPTION

ASPHALTOPLAST is the standard roofing and waterproofing membrane, reinforced either with a core of non-woven polyester of 180g/m2 nominal weight (referred to as P) or a 50g/m2 fiberglass fleece (referred to as F). It is the recommended roofing membrane but can be useful for another variety of applications among them; large slabs, terraces, bathrooms, wet areas, foundations, basements, tanking and others.

Variants of the membrane come with other polyester reinforcement of 200g/m² to 250g/m2.

PLASTOMEX

An APP type modified bituminous membrane

DESCRIPTION

PLASTOMEX is a general-purpose roofing and waterproofing membrane, reinforced either with a core of non woven polyester of 140g/m2 nominal weight (referred to as P) or a 50g/m² fiberglass fleece (referred to as F). It is suitable for a variety of applications among them; roofs, terraces, bathrooms, wet areas, foundations, basements, tanking and others.

ROFLEX-P

APP MODIFIED BITUMEN PLASTOMERIC WATERPROOFING MEMBRANE

DESCRIPTION

Plastomeric waterproofing membrane modified with top quality APP polymers and reinforced with non-woven polyester.

BITUSHAPE-P

APP MODIFIED BITUMEN PLASTOMERIC WATERPROOFING MEMBRANE

REINFORCED WITH SPUN-BOND NON WOVEN POLYESTER

What is BITUSHAPE ?

  • Produced by the Modern Waterproofing Company,
  • BITUSHAPE is a line of polymer-modified bitumen waterproofing membrane of the highest quality.
  • BITUSHAPE is modified by APP and APAO, thus guaranteeing superior performance under various conditions

USES

BITUSHAPE -P is a general-purpose membrane, can be applied virtually anywhere where torch-applied modified bitumen membranes subject to light to moderate mechanical stresses are specified, and normal low-temperature performance is required.

Product Range

  • Standard thickness available includes 3mm and 4mm. Some types could be available by weight 3kg/m2 and 4kg/m2.
  • Bottom surface finish is normally Polyethylene Film (PE)

Upper surface finish choices include:

  • Polyethylene Film (PE)
  • Fine Sand (S)
  • Mineral Slated Grey (GY)
  • Mineral Slated Green (GRN)
  • Mineral Slated White (WT)
  • Mineral Slated Red (RD)

BITUSHAPE -P can be applied in:

  • Single layer roofing system for normal use.
  • Double layer roofing system combined with BITUSHAPE - G fiberglass reinforced.
  • Waterproofing of toilets & wet area inside buildings.
  • Slab on grade

BITUSHAPE -P with Mineral Slated Finish is recommended for exposed roofing system (Unprotected) for Non-accessible roofs or roofs subject to low traffic conditions.

ACRYLIC ELASTOMERIC EMULSION

DERMACRYL

DESCRIPTION

CRYL is an acrylic water-based waterproofing emulsion that cures into a tough elastic film able to withstand severe expansion and contraction movements. A non-toxic, Environmentally friendly coating that combines both waterproofing and reflective abilities.

ALYAF A201, A301 and A251

ALYAF A201 is a nonwoven geotextile made from staple fibers, mechanically bonded by a needle punching process to produce a dimensionally stable network. The fibers used are 100% whiten polyester, ultra-violet resistant with 256°C melting point. ALYAF geotextiles are manufactured according to Quality System procedures that have been assessed and certified in accordance to EN ISO 9001:2008.


APPLICATION AREAS:

  • FILTRATION
  • ROADS
  • RAILWAYS
  • TURMELS & UNDERGROUND
  • STRUCTURES
  • EROSION CONTROL SYSTEMS
  • DRAMMADE
  • DRAINAGE
  • CANALS
  • SOLID WASTE
  • LIQUID WASTE
  • RESERVOIRS & DAMS
  • FOUNDATION & RETAINING

AQUABRUSH

Two component flexible cement for mortar for waterproofing

DESCRIPTION

AQUABRUSH is a complete easy to use cementitious waterproofing system. It consists of two-component packages, factory blended under strict quality control for optimum results in the field. A is specifically designed to waterproof and protect concrete and masonry surfaces. It is ideal for above and below ground structures, interior and exterior AQ is used extensively in below-grade areas subjected to water pressures in tanks, underground, utility structures, concrete and masonry foundations, elevator pits, cisterns, and all types of liquid containing facilities.

MONNELI MANTOBRUSH

Two-Component Elastomeric Cementitious Waterproofing Coating

DESCRIPTION

MANTOBRUSH is a two-component, cementitious acrylic modified waterproofing coating. It is composed of special types of types of cement, silica sand, reactive fillers (powder), and acrylic polymer blended with chemical additives (liquid). Once mixed, it produces a workable, easy to apply product that can be applied with a brush or spatula.

MANTOBRUSH provides a seamless, hard wearing, flexible waterproofing membrane with excellent
adhesion to the surface.

USES

  • To protect exposed reinforced concrete structures from acid rains and chloride iron attacks
  • Waterproofing for water tanks, reservoirs, roofs, marine structures
  • Waterproofing and protective coating for substructure footing
  • To coat channels against seawater and brackish water
  • To coat the backside of marble and granite against water and pigments penetration

AQUAPRIM EMULSION - MWDATASHEET

DESCRIPTION

Brush applicable bitumen emulsion. Thick liquid formed of water emulsified bitumen blend suitable to be used as a protective coating for concrete, masonry and as primer for Bituminous membranes.

YIELD

The recommended rate of application is 2.5m per liter depending on site condition.

HEALTH & SAFETY

As with all Bitumen products caution should always be exercised.
Protective clothing such as gloves and goggles should be worn. Treat any splashes to the skin or eyes immediately with fresh water. Should any of the products be accidentally swallowed, do not induce vomiting call for medical assistance immediately. Ensure that the container is available for medical attendants to examine any relevant instructions and content details.

CLEANING

The surface shall be cleaned thoroughly of all contaminants like dust, traces of curing compound, oil
and grease. All surface imperfections. protrusions, structurally unsound and friable concrete must be
removed.

MONNELI ASFABIT

Cold Applied Bitumen Emulsion

This preparation shall be such as to leave a sound exposed concrete surface free from dust, loose
particles and any deleterious matter. If the concrete

DESCRIPTION

ASFABIT is a cold applied water based bitumen with special additives. It is a blend of selected bitumen
emulsified with water to give an easily applied protective coating. Once cured, ASFABIT forms a seamless film with great adhesion to the substrate.

USES

  • General waterproofing and protective coating for concrete, screeds, masonry, metal surfaces, pipes and many other surfaces
  • As vapor/salt barrier and damp proofing behind granite, marble, curtain walls, etc.
  • Sealer for concrete before applying the top finishing coats.
  • As a curing membrane for concrete below ground
  • Protective coating to concrete slabs above false ceiling, bulkheads, etc.

APPLICATION

For waterproofing underground structures, the bituminous emulsion shall be applied by brush or squeegee at a maximum rate of 200 microns per coat. The two coats must be applied at right angles to one another with a minimum of 6-hour intervals between each application at 25°C. Each coat must be completely dry before the next coat is applied.

AQUATEX 2000

DESCRIPTION

Anionic latex modified bitumen emulsion; Latex Rubber content of dry film 15% minimum. It is dark brown in color, the product also contains a quantity of bio-acid to inhibit the growth of bacteria and mould both in the product itself and subsequent to application. These properties impart excellent durability and waterproofing characteristics

USES

Used for waterproofing in wet areas (bathrooms and kitchens) and as a damp proofing membrane in sandwich construction as a general-purpose waterproofer for walls, floors, other structures, and as a vapor seal as well. It's also an effective adhesive and bonding agent for insulation boards, cork panels
etc. It's practically suitable where some movements of structure are expected, exhibits much better permeability and elasticity characteristics than similar material without latex.

APPLICATION

The surface to be treated should be cleaned, remove dust. grease etc., should be applied by brush, roller or by spraying equipment for large surfaces on concrete or other absorbent surfaces first apply a coat of AQUATEX 2000.

MONNELI ASFABIT RB

Flexible, Rubberized Bitumen Emulsion

DESCRIPTION

ASFABIT RB is a cold applied rubberized bitumen emulsion in dark brown color that, when dries, it
forms tough black seamless and flexible coating.

This preparation shall be such as to leave a sound exposed concrete surface free from dust, loose particles and any deleterious matter. If the concrete surface is defective or has laitance, it must be cut back to a sound base.

MONNELI ELASTOSEAL PU25

Single Component Polyurethane Joint Sealant

DESCRIPTION

ELASTOSEAL PU25 is a high-performance, single component moisture-curing polyurethane, elastomeric joint sealant. When cured it forms a flexible, weatherproof joint sealant with superior adhesion to most substrates.

USES

ELASTOSEAL PU25 can be used in a wide range of applications in the construction industry including:

  • Internal and external expansion and control joints with up to 50% movement
  • Precast concrete panel joints
  • Perimeter caulking for parapets windows, doors, aluminum panels, metal cladding, wooden frames
  • Recommended for bonding clay and concrete roof tile

MONNELI KRETESIL CR

Crystalline Waterproofing Mortar

DESCRIPTION

KRETESIL CR provides total and permanent waterproofing solution to water leakage, ingress or seepage in concrete structures or any cementitious substrates due its unique, surface-applied penetrative capillary waterproofing system.

USES

KRETESIL CR is generally applied to concrete and other cement structures where water needs to be kept in or kept out such as:

  • Industrial processing plants
  • Parking decks
  • Road decks
  • Cellars and concrete roofs, etc.

MONNELI KRETESIL NT

Elastomeric Cementitious Waterproofing Mortar

DESCRIPTION

KRETESIL NT is a two component acrylic modified cementitious waterproofing mortar composed of  high quality cement, silica sand, special hydrophobic agents in powder form (component A) and specially formulated copolymer acrylic agent in liquid form (component B). It can be applied on concrete, bricks, cement plasters, etc.

USES

KRETESIL NT is primarily used for waterproofing surface treatments of concrete or masonry water tanks designed to contain drinking water. It is nontoxic and easy to apply, with excellent bonding to concrete and masonry.

Static cracks that are greater than 0.3mm shall be repaired by chiseling the crack into a V-shape, to a depth and width of 25mm and priming it with Primer A18 followed by the application of COLMEF's cementitious repair material.

KRETESIL NT can also be used for the following:

  •  Waterproofing coating on roof
  • Protection against brackish water
  • Coating seawater channels
  • Waterproofing and protective coating for marine structures

MONNELI SBR LATEX RIPRESA 

SBR Bonding Agent for Cement Mortar & Concrete

DESCRIPTION

SBR LATEX RIPRESA is a styrene butadiene polymer latex with high bonding characteristics. It is stable under wet alkaline conditions forming a reinforcing polymer matrix within cementitious mixes including concrete, screed and mortar. It is mixed with cement mixture to give higher adhesion power to all surfaces, extra bonding strength, excellent plasticity, higher impermeability and flexure resistance, higher abrasion and acid resistance and can be considered as a waterproof admixture when mixed with cement.

USES

SBR LATEX RIPRESA is used to:

  • Increase the adhesion power of cementitious mixtures
  • As an anchorage mortar in casting resumption to act as a bonding force between new and old concrete
  • For repairing cement and mortar
  • Tiles fixing with the traditional method
  • Higher plaster resistance
  • Small thickness plastering and as a filling mortar
  • Floor screeds and floor hardener
  • Cementitious rendering as rush coat
  •  Waterproof renders and cementitious slurries

Mortars mixed with SBR LATEX RIPRESA can be used for horizontal, vertical, and overhead repair works

MONNELI MUREX 

Rapid Setting Water Plug Mortar

DESCRIPTION

MUREX is a rapid setting water plug mortar composed of special blend of hydraulic cements, fillers, graded fillers and chemical additives. MUREX is a dry powder that when mixed with water, quickly sets and expands as it cures to provide a permanent watertight seal thereby stops rapidly active water
leaks and seepage holes and cracks in concrete and masonry

USES

MUREX is an effective water plugging product that can be used for sealing cracks and construction
joints in the following:

  • Concrete
  • Masonry walls
  • Swimming pools
  • Sea walls
  • Reservoirs
  • Sewage systems
  • Pipes and mines
  • Tunnels
  • Fountains
  • Water conduits and drains
  • Ponds and piers

MONNELI ELASTOJOINT PVC

Flexible PVC Waterstop

DESCRIPTION

ELASTOJOINT PVC is primarily composed of high grade quality Poly-Vinyl Chloride compound that is plasticized and stabilized in order to offer an extra long life performance in concrete structures against water leakages. It is specially designed to serve as an integral sealing system for construction, contract
and expansion joints in areas where water retention and water exclusion is required.

USES

ELASTOJOINT PVC provides an effective and thorough means of waterproofing for the following:

  • Reservoirs
  • Water towers and sewage tanks
  • Dams and culverts
  • Canals and spillways
  • • Swimming Pools

ELASTOJOINT PVC serves also powerful support to keep water out of concrete structures such as:

  • Basements and underground car parks
  • Tunnels and subwaysRetaining walls and roof decks

Products and Services(15 Images)